라운드 픽업 베일러

Hay pick up baler machine丨tractor with baler

건초 픽업 포장기 기계는 일종의 짚 따기 및 수확 장비로, 목초지, 쌀, 밀 및 반죽 옥수수 줄기의 따기, 포장 및 방출을 자동으로 완료할 수 있으며 건조하고 녹색 목초지를 수집하고 포장하는 데 널리 사용됩니다. 쌀, 밀, 옥수수 줄기. 짚 따기 및 나르는 기계는 컴팩트한 구조, 편리한 작동 및 높은 신뢰성의 특징을 가지고 있습니다.

형성된 베일은 작고 콤팩트하며 베일의 내부는 느슨하고 외부는 단단하며 통기성이 좋아 운송 및 보관이 편리합니다.

Introduction to hay pick up baler machine


Now we produce straw picking and baling machine which can handle round and square finished products. The round straw picking and baling machine can bale with sisal rope or net, while the square one can only bale with rope. Both models work with a tractor through a PTO. About the harvesting width of the machine. The harvesting width of square one is 2.2 meters and the round one is 1.8 meters.

The promotion and use of this machine have played a great role in promoting the solution of straw recycling, and improving the environmental pollution caused by burning straw in the countryside. And improving the quality of straw and grass utilization. Since its launch, the machine has been loved by most farmers. And is a good helper for our farmers to get rich. What’s more, we also have the silage pick-up baler with a crushing function.

Application scope of the tractor with a baler


The tractor with a baler can process wheat straw, rice straw, pasture grass, peanut seedlings, corn straw, rice, wheat, rape straw, soybean, etc.

Structure of the round pickup baler


The machine is mainly composed of the picker, haying drum, sprocket transmission mechanism, rope box, rope guide rod and warning device, hydraulic control mechanism, and other components. When baling, it can automatically lead the rope, automatically pick up the straw, automatically bale, and automatically cut the rope. And can change the rope circle and bale density when baling by adjusting the size of the slot wheel, so that the bale will not be scattered and messy.

사각 줄기 나르는 기계의 구조
사각 줄기 나르는 기계의 구조

Parameters of the hay pick up baler machine

모델ST80*100
무게680kg
트랙터의 힘40마력 이상
전반적인 차원1.63*1.37*1.43m
베일러 크기Φ800*1000mm
베일러 무게40-50kg
용량1.3-1.65에이커/시간
건초 픽업 포장기 기계의 매개변수

Advantages of the high capacity small square baler

  1. 작은 설치 공간, 가볍고 간단한 조작, 고효율.
  2. 높은 작업 효율성으로 1시간에 5에이커 이상의 짚, 약 800kg의 짚 작물을 수집할 수 있습니다.
  3. 스트로베일은 구조가 조밀하고 밀도가 높으며 공기 투과성이 좋습니다.
  4. 베일링 후 짚은 짚의 설치 공간을 줄이고 저장 공간을 크게 줄입니다.
  5. 짚더미는 운반이 쉽고 화재 가능성도 줄어듭니다.

Working principle of stalk pick up baler machine


The power output shaft of the tractor is fed to the input shaft of the baler through the universal drive shaft, which drives the reeling roller mechanism. And the straw picking mechanism through the sprocket and chain respectively. The hydraulic output interface of the tractor is used to control the piston expansion and contraction of the cylinder to realize the bale releasing operation.

Technical points of straw picking and baling machine operation

  1. 운전자는 운전조작 기술을 숙지해야 합니다. 운전 중에는 베일의 헤드가 커지는 것을 방지하기 위해 운전자가 중앙에서 운전해야 합니다.
  2. 베일 로프는 외부 펌핑 구조로 매듭이 적고 강도가 높아 로프나 카드 로프가 끊어지는 것을 방지합니다.
  3. 스로틀이 안정되어야 할 때 로프를 보내고, 로프 송신 품질을 보장하기 위해 스로틀을 중간 속도로 유지하십시오.
  4. 로프를 정지시키려면 즉시 유압 밸브를 움직이고 정지하지 마십시오. 그래야 스트로베일이 압력 롤러에 의해 떨어져 나가지 않습니다. 베일을 방출할 때 회전 관성에 의해 베일이 방출될 수 있으므로 속도를 늦추지 마십시오.
건초 픽업 포장기 기계
건초 픽업 포장기 기계